MCP 737 NG PRO

 

Buy it Now !

 

* 100% scaled of Boeing 737 MODE CONTROL PANEL
* Dimensions W:470mm H:78mm D:150mm. (D:40mm without box).
* Two independent COURSE knob and display (Captain and F/O)
* Two independent Flight Director on/off toggles without led indicator
* Autothrottle ARM on/off toggle with led indicator

FUNCTIONS:

N1,
SPEED,
FD1 and 2,
A/T ARM,
LVL CHG,
VNAV,
HDG SEL,
APP,
VOR LOC,
LNAV,
ALT HLD,
V/S,
CMD A and B,
CWS A and B,
DISENGAGE control bar
Course 1 and 2,
IAS / MACH,
Heading,
Altitude,
Vertical Speed,

* ALT and SPEED intervention
* ALT HLD, V/S, CMDA, CMDB, CWSA and CWSB lighting buttons green
* C/O button for IAS or MACH selection
* SPEED, HEADING, ALTITUDE Knob and display
* VERTICAL SPEED wheel control and display
* Display characteristics: LED 7 segment. Digit height: 0,3" (7,6 mm).
* Display color: Yellow.
* Displays brightness controlled by software. * No additional cards needed.
* Manages decimal points and negative figures.
* Encoders characteristics: Gray 16 increment for rotation (with detent).
* Horizontal digital encoder to set Vertical Speed (16 increment for turn).
* V/S encoders characteristics: 16 increment for rotation (with detent).
* USB Interface (USB cable provided).
* Compatible with default FS aircraft*, Project Magenta, and others add-ons
* Compatible 100% with PMDG V1.3 + Update 700-800 and PROJECT MAGENTA
* Driver SIOC provided

OPTIONS:
Display Color 7 segments available on order quote: Red or White (contact us for quoting)
Backlighting from Plugnfly EL WIRE available on order quote :White or blue (contact us for quoting)
Power Supply: 5Vdc 1A (not need in single use).

*TIP: FS AIRCRAFT

MCP hardware support all function present on MCP of FS737 default
* LNAV, VNAV, CWSA, CWSB and FD2 are not supported. You can assign different function to this button and switch using SIOC program
* The hardware send the command to FS_COM and wait a feed back from the software because the hardware don't know the real flight condition.
DEFAULT FS737 MCP data status before give a feed back to the hardware
* So if you have some doubt about some function that is not engaged by FS737 MCP please try to select with the mouse the function that give you the problem
(probably also with the mouse PM will not accept the command).This is a very important test to make ever before contact plugnfly support.
* For any doubt about hardware functionality test ever the MCP with Test MCP program.
* If with Test MCPHardware the hardware work correctly meant that there is no hardware failure, but the problem is only inside to the software that don't accept the command. Please check your flight condition.